You want to take your weekend warrior for a cruise with your mates, you go to start it and nothing happens when you turn the key. Your battery is dead and you are going nowhere fast.
YOU NEED OUR CT5 TIME TO GO BATTERY CHARGER AND MAINTAINER
Get your life back with the first battery charger in the world to show you exactly when your battery will be charged and ready to go.
Part no. 40-164 / 40-689
Countdown Timer and Start Indicator
Built-In Temperature Compensation
AGM & Reconditioning Mode
Connect and Forget
Description
12V | Countdown function, to know when the battery will be charged
The ground breaking CT5 TIME TO GO battery charger and maintainer is a world first because it answers the question ‘When will my battery be fully charged?’ This means you can plan your day around your battery charging because the CT5 TIME TO GO gives you an accurate prediction of the remaining charging time in hours. Not only that, it’ll also tell you when you can safely try to start your vehicle before the battery is fully charged. The CT5 TIME TO GO uses advanced technology to give you three charging and maintenance programs – Normal, AGM and Recond. It’s easy to use and fully automatic, so it can be connected directly to the battery indefinitely, if required, and it won’t over or under charge.
Features
- Practical and easy to use
- ‘Try’ indicator shows when it’s possible to make ONE start attempt
- Tests and restores battery capacity
- Normal program for medium sized lead acid batteries
- AGM program for medium sized lead acid AGM batteries
- Suitable for all types of 12V lead acid batteries
- Non sparking
- Reverse polarity protected
- Short circuit proof
- Shows you exactly how long in hours until the battery is fully charged
- Recond program for reconditioning deeply discharged batteries
- Fully automatic charging
- 5-year warranty
-
Charging category AC charging
-
Input 220–240 VAC, 50–60 Hz, 0.6 A
-
Output 14.4/14.7/15.8 V, 5.0 A
-
Battery chemistry Lead acid
-
Battery types 12 V:; WET; MF; Ca/Ca; AGM; GEL
-
Battery capacity 20–160 Ah
-
Back current drain* Corresponding to less than 1.5 Ah/month
-
Battery voltage 12 V
-
Ambient operating temperature -20 ˚C to +50 ˚C
-
Start voltage 2.0 V
-
Temperature compensation Built-in compensation of charging voltage based on ambient temperature.
-
Degree of protection IP65
-
Warranty 5 years
-
Disclaimer All products and product specifications are subject to change without notice, to improve reliability, function or design. In the event of product error, we reserve the right to inspect the product and verify the fault. All product returns are subject to our standard warranty terms.
- *) Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.
- CTEK issues a limited warranty to the original purchaser of the product. Depending on the product, the limited warranty period will vary. The limited warranty is not transferable. The warranty applies to manufacturing faults and material defects. The warranty is void if the product has been handled carelessly or repaired by anyone other than CTEK or its authorized representatives. CTEK makes no warranty other than this limited warranty and is not liable for any other costs other than those mentioned above, i.e. no consequential damages. Moreover, CTEK is not obligated to any other warranty other than this warranty.